500 Watt - 24V Brushed Motor Controller

500 Watt - 24V Controller.  These controllers we had made specificly for Wild.  We use them in our variable speed kits for the Razor Scooters. This controller is for brushed (Also known as "PM" or "Magnet" motors).

Great controller, durable and long lasting.  For the price you can't go wrong.

Wiring:

Large Red/Black Wires in 2 pin Connector:
Red: Batt +
Black: Batt -

Large Blue/Yellow Wires in 2 pin Connector:
Blue: Motor
Yellow: Motor
(If motor runs backwards, reverse these wires)

---------------------------------------------------------------------------------

Small Blue/Black/Red wires in 3 pin Connector:
Red: + 5V
Black: Ground
Blue: Signal

Small Red/Blue wires in 2 pin Connector:
Key Switch Wires (Connected = power on)

Small Red/Black wires in 2 pin Connector Labeled "Charging Port":
These wires go to the charger port
Red is +
Black is -

Small Red/Black wires in 2 pin Connector Labeled Brake Light:
These wires connect to an optional brake light.

Small Red/Black wires in 2 pin Connector thats not labled:
Indicator Light, normally used for throttle LED battery indicator lights
Red is +
Black is -

Small Black/Yellow wires in 2 pin Connector:
Brake Safety Switch.
If these wires are connected the controller kills the power output
Normally used to connect to a brake lever switch.