Dunarri Hitch Lock for 2" Reciever Hitches

This lock will work with standard 2" reciever hitches found on most SUV's and 1/2 ton pickup trucks (i.e. F150).  It will NOT work on 2.5" or 3" hitches found on late model 1 ton trucks.  It will be too short.  Please purchase our HL25A for these applications.  If in doubt measure the INSIDE diameter of your hitch opening.

A hitch lock locks your receiver drawbar into the Receiver hitch on your vehicle.  This protects someone from stealing your hitch!  Kinda, a no brainier...if you have a hitch in your receiver you should always have a lock, especially if you have one of our Weigh-Safe or other expensive hitches!

We looked at all the lock designs out there and made a few changes.  First off we knurled the ends of the lock to make it easier to pull out if its wet or muddy.  We also used a round-style key for better security.  The flat key style locks can be picked in seconds, not so much with the round style.  Who would pick a receiver lock?  Well, when you have a $250 hitch in there, the answer is quite a few people!

The finish is plated to protect against corrosion.  The lock also comes with a rubber cover to cover over the part where you insert the key to keep the weather out.

We think we have designed the perfect receiver lock.  We always welcome your comments, if you think we missed something or should make a change on future versions let us know!

Dimensions:

Pin Diameter: 5/8"

Usable Width: 2.65"