Control Module for Razor E100 / E125 / E150 / E175 / eSpark / E2 Trikke
Control Module (Chain Driven/7 Connector) for the Razor E100 Series, E Spark & some versions of the E2 Trikke*
*Control Module Only Fits Select Scooters & Versions*
Brand new 24V controller / control module for the Razor E1 series electric scooters and the eSpark and Trikke E2.
If your scooter turns on, but doesn't move then the problem is most likely the controller or throttle.
We also sell a kit including the throttle if you need both.
This controller works with the following Razor models:
- E100 V10+
- E125 V10+
- E150 V1+
- E175 V19+
- eSpark (V41+)
The controller model is ZK2400-DP
Due to this being an electronic item, NO RETURNS ACCEPTED
All controllers are tested and verified to be working.
Please watch the following video, which explains the most common issue customers have when installing the controller:
Razor E100 Tech - Controller and Throttle Operation (ebay Safe) - YouTube
Video will open in a new window
One final thing to note is that these controllers feature a low voltage cutoff below 23V, so if your batteries aren't fully charged or are bad the power switch may still light up, but the controller won't "click" despite it still being good. To troubleshoot your scooter you should verify the battery output is at least 23V.
Fits | Razor E Spark, Razor E100, Razor E125, Razor E150, Razor E175, Razor E2 Trikke |
---|---|
Manufacturer | Razor |
Manufacturer's Part Number | W13111612015 |
Hitch Lock | None |
Part Status | In-Production |
Write Your Own Review
We found other products you might like!