60" Brake Cable

We can't tell you how many times a customer has called us with poor braking performance and the problem turned out to be a simple as replacing the brake cable. We keep these brake cables in stock, because they seem to work the best and not stretch over time.

Replacing a brake cable is simple, the entire process normally only takes 15 minutes.  To ease the installation process you can tape the new cable to the old one, and use the old cable to pull the new one into place.  On some machines this saves a lot of time!

Our high quality 60" brake cable works with many electric scooters and can be cut to the size you need. The sleeve housing measures 60" and the inner wire is extra long with a soldered end so it won't fray.

This brake cable is sized to fit the following electric scooters, as well as just about any others that use cable operated brakes):
Currie eZip 400, 400NS, 450, 500, 750, 900, 1000, 4.0
Currie iZip 130, 150, 200, 400, 300, 400, 500, 650, 750, 1000, Fusion, Scoot-E
Currie GT 200, 210, 300, 350, 500, 750
Currie Trailz, Tsunami, Asteroid
Schwinn 150, 200, 300, 400, 500, 600, 650, 750, 1000, Stealth, 4.0, S150 Stingray, S180, S350, X-Cel, Missle, Lightning
Mongoose 200, 500, M150, M250, Z350, Pro Fusion
Razor E200, E300