Headset Bearing for 1-1/8 Fork Tube (Dunarri)
- Dunarri Headset
- 1-1/8 Size
- Measure O.D of threaded fork Tube, if its 1-1/8 this is the correct headset
- Color: Black
We had a hard time finding a good headset bearing kit on the market, so we had these headset bearings produced just for us. If your looking for a headset bearing for a scooter or maybe your custom project, you have found the right place!
First off we made these all black, since thats the color most of us are looking for. Then we made sure you have all the parts you need - this is a 9 piece headset kit! It includes:
1. Top Nut (Upper)
2. Lock Washer w/ locing notch (Makes it easy to tighten top nut without the lower one rotating!
2. Top Nut (Lower w/ Race)
3. Upper Bearing
4. Upper Race
5. Lower Race
6. Lower Bearing
7. Race for Fork Tube (Offten left out on other kits!)
8. Lower Seal
Measuring headset bearings to find the right size is always confusing since everyone gives you a measurement of somthing different. We make it easy, measure the large threaded tube on the fork (The tube the big nuts go onto). If its about 1-1/8" then this is the headset for you.!
|Fits||Universal Part/Fits Many Units|
|Manufacturer's Part Number||DUN-HS-118-BLK|