Headlight / Horn / Signal Handlebar Switch (DK18 Copy)
- 3 Switch Unit
- Normally used for Headlights, Signals and Horn switch control on bikes and scooters
- fits 7/8" bar
Headlight / Horn / Signal Handlebar Switch. This switch is VERY similar to a Wuxing DK18. It fits over a 7/8" handlebar. Great for use on a scooter, ebike, motorcycle, ATV or anything! We love these switches, they are inexpensive and work well.
If switching loads over 1 amp such as high power lights - use a relay and have the switch turn the relay on and off.
- Headlight Switch is latching (Push once for pn, push again for off).
- Horn Switch is momentary (Press to tun on, when you let go it turns off).
- Signal Switch is SPDT with a center off position, used for turn signals.
Wiring
-----------------------------
Comes with small connectors and a short wire. You will most likely want to cut the connectors off and hardwire.
| Manufacturer | Dunarri |
|---|---|
| Manufacturer's Part Number | DUNDK18 |
| Fits | Universal Part/Fits Many Units |
Write Your Own Review