Dunarri Antminer Dual Power Cable 12AWG (4')

This listing is for the 4' Version

You wont find these cables anywhere else, we make them...they ARE NOT an off-the-shelf product!

12 AWG cable to the "Y", then 14 AWG on each cable to the miner.  This is NEC correct!  Some call 14 AWG "Heavy Duty".  Not sure what world they come from, but ask any electrician, anything over 15.0 amp requires 12 AWG!

NEMA 6-20 Plug, with 2 IEC C13 connectors to go into the miner.

Antminer power cables are always a tricky purchase.  An Antminer S19 draws up around 15 Amps, making standard 16 or even 14 AWG power cables unsafe.  On top of that, if you find a 12 AWG cable, you will need 2 of them, one for each plug on the miner.  You then need 2 receptacles for the miner, and have double the cable clutter.  What a mess!

We couldn't find a proper Y cable, so we created our own.  The Dunarri Antminer Dual Power Cable has a single 12 AWG cord, to a molded Y connector that splits to two 14 AWG cables with IEC connectors to plug into your miner.  This means no cable is overloaded past its NEC rating. (14 AWG Max is 15A, 12 AWG Max is 20A)

Available in 4, 7, and 11 foot lengths.

Its the perfect cable, and you wont find it anywhere else, since its manufactured exclusively for Dunarri.