1000 Watt - 48V Brushed Motor Controller (YK33F)

1000 Watt - 48V Controller.  These controllers we had made specificly for Wild.  We use them in our variable speed kits for the Razor Scooters. This controller is for brushed (Also known as "PM" or "Magnet" motors).  This controller is offten referred to as a YK33F - very similar to a LB37.

Great controller, durable and long lasting.  For the price you can't go wrong.

Wiring the controller

   Thick Red/Black:  Batt (Red+, Black-)

   Thick Blue/Yellow:  Motor

   Thin Yellow/Black: Brake Switch (When closed throttle is disabled)

   Thin Yellow/Black: Brake Switch (When closed throttle is disabled)

   Thin Green/Black/Red (Derailleur): Throttle (Red: +5v, Black: Ground, Green: Signal)

   Thin Black/Red (Charging Port): Charging Port

   Thin Black/Red (Indicator): Power light (Provides full pack voltage when power/key is on, used to run an indicator light)

   Thin Black/Red (Brake Light): Brake Light

   Thin Blue/Red (Power Locks): Key or power switch (When closed power is on)

   Thin Green/Yellow (Sport): Unused